We use our MTE Resurfacing Belt Sander to resurface most Exhaust & Intake manifolds.
If the situation arises we can set-up on the Kwik-Way 862 CBN Resurfacer, but most times this way is cost prohibited
Brazing off Broken Cast
We can braze cast lugs or some cracks on blocks, manifolds and cylinder heads. This cylinder head had a crack running over the valve cover area and into threaded hole on side
We can machine your heads to relieve casting obstructions under the seat area increasing flow of the ports.
We use a Winona Van Norman model FG500 flywheel resurfacer for all types of flywheels. We use a CBN impregnated grinding wheel and we can resurface step flywheels up to 24 inch diameter.
Copyright © 2020 Lloyd's Cylinder Head Repair - All Rights Reserved. website by Stomponato.com